ADV 50-6304 - $498.59

Advanced Adapters GM 4WD Th350 3 Speed Automatic Transmission to Jeep Dana 300 Adapter Kit

• Allows you to adapt a GM Th350 3 speed automatic transmission to the Jeep Dana 300 transfer case.
• Manufactured from 356-T6 heat treated aluminum alloy.
• Housing length - 3.625"
• Fits - Jeep Dana 300 Transfer Case
• Adapter kit includes - Adapter housing, 27 x 23 spline spud shaft, snap rings, bearing, gasket, o-ring, and fastening hardware/instructions.

ADV 50-8500 - $162.15

Advanced Adapters GM 4WD Th350 3 Speed Automatic Transmission to S-Series Truck Transfer Case Adapter Kit

• Allows you to adapt a GM Th350 3 speed automatic transmission to the S-Series truck transfer case.
• Kit works inconjuction with the original GM 700R4 adapter.
• S-series trucks that were previously equipped with a 5 speed transmission, it is necessary to get the stock GM 4wd adapter housing and transfer case shifter bracket from the 700R4 application.
• Adapter kit includes - Custom output shaft, adapter housing, and fastening hardware.

(Top) Casting # 14038683

(Bottom) Casting # 15597796 Or 5629188

700R4 to NP208 / 241 - Short and Tall Mount Leg Used

• Adapter Length - 3-7/8"

Casting # 13317

NP 435 Ford to NP205 and most other Ford T/C's

• Adapter Length - 8-7/8"

Casting # 335345

"Turbo 350" Th350 to NP203

• Adapter Length - 1-3/8"

Casting # 376129

"Turbo 400" Th400 to NP203

• Adapter Length - 1-3/8"

Casting # 14020861

"Turbo 400" Th400 to NP208

• Adapter Length - 2-3/4"

Casting # 28-R-100 (Out of Stock)

2WD C6 Tailshaft QuadraVan to NP205 / 208 and Borg Warner T/C's

• Adapter Length - 13-3/4"

Casting # 6271549

SM465 to NP205

• Adapter Length - 6-15/16"

Casting # D4TP-7A040-A1A

C6 to NP203

• Adapter Length - 6-13/16"

Casting # 15557796

SM465 to NP205 / 208 Round Pattern, 1980 +

• Adapter Length - 8-7/8"

(Top) Casting #D7TP-7A040-BA (Cast Iron)

(Bottom) Casting #D8TP-7A040-AA (Aluminum)

C6 to New Process and Borg Warner Transfer Cases (All)

• Adapter Length - 5-3/4"
• Shaft Length - 15-1/2" - T/C 31 Spline

Casting # 336984

SM465 to NP203

• Adapter Length - 4-3/8"
• 25lbs.

Casting # D7TP-7A040-CA

C6 to NP205

• 205 T/C long adapter must be used for clearances of a VC Driveshaft.
• Adapter Length - 8-3/4"

Casting # 3836016

727 Auto to NP208 +

• Adapter Length - 10-3/16"

Casting # 3743284-9

727 Auto to NP203

• Adapter Length - 8-3/8"