1976 & Up CJ5 Frame in powder coat finish. Includes sleeved for shackle reversal kit. - $1,700.00

4" x 4"

#WOO4BP - $3.50 Each

Base Plate Mounting for Roll Cages

• 4x4” with 3/8” holes, 3/16” thick

3" x 3"

#WOO3BP (Right in picture) - $3.00 Each

Base Plate Mounting for Roll Cages

3" Crotch Bolt Assembly

#TL004909101 - $8.00 Each

3” Tower Tab 1/4” Thick

3/8" Rod End

#MGBSPF-6 - $12.50 Each

3/8” Rod End

• Linkage made smooth, Good for Shift linkage, Clutch linkage etc.
• Other size’s not shown - 1/4”, 7/16”, 1/2”, 5/8”
• Male & Female Rods available.

5/16" Rod End

#MGBCF5 - $12.00 Each

5/16” Rod End

• Linkage made smooth, Good for Shift linkage, Clutch linkage etc.
• Other size’s not shown - 1/4”, 7/16”, 1/2”, 5/8”
• Male & Female Rods available.

3/4" Chrome Moly Rod Ends & Accessories

1. #BAL553 - Rod End spacer .45” thick - $7.00 Each
2. #BAL681 - Safety Washer .30” thick - $7.00 Each
3. #BAL510 - High Angle Spacer .40”thick, 5/8” Bolt - $13.00 Each
4. #MGBCF12 - Female Rod End .875”thick - $32.50 Each
5. #RE13010 - 3/4” x 3/4” x L.H. Rod End .875” Thick - $30.00 Each
6. #RE13030 - 3/4” x 3/4” x R.H. Rod End .875” Thick - $30.00 Each
7. #FAS36966 - 3/4” Jam Nut L.H.
8. #FAS36266 - 3/4” Jam Nut R.H.
9. #RERM12000 - 3/4” L.H. Tube Adapter for 1” ID Tube. - $12.00 Each
10. #RERM12010 - 3/4” R.H. Tube Adapter for 1” ID Tube. - $12.00 Each

7/8” 14 TPI Chrome-Moly Rod Ends & Accessories

1. #BAL565 - 7/8” to 3/4” step down spacer .065 thick. - $7.50 Each
2. #BAL566 - 7/8” to 5/8” step down spacer .065 thick. - $7.50 Each
3. #BAL512 - High 7/8” (For 5/8” bolt) .595” thick. - $15.00 Each
4. #BAL914 - 7/8” L.H. Rod End .875” thick. - $39.95 Each
5. #BAL913 - 7/8” R.H. Rod End .875” thick. - $39.95 Each
6. #FAS36968 - L.H. Jam Nut 7/8” - $2.50 Each
7. #FAS36267 - R.H. Jam Nut 7/8” - $2.50 Each
8. #BAL220 - 7/8” Tube Inserts - 14 TPI L.H. - $15.95 Each
9. #BAL219 - 7/8” Tube Inserts - 14 TPI R.H. - $15.95 Each

7/8" Rod End L.H.

#BAL911 - $50.00 Each

• 7/8” x 3/4” L.H. 14 TPI

7/8" Rod End R.H.

#BAL912 - $50.00 Each

• 7/8” x 3/4” R.H. 14 TPI

#BALXM-16 - $89.50 Each

Rod End 1 1/4” x 1”R.H.

• Big 1 1/4” x 1” Chrome-Moly
• Usually for suspension & H.D. Traction systems.

#BAL1.25-12TPI - $4.00 Each

• 1 1/4” 12TPI Jam Nut

#TL004920202 - $50.00 Each

• 7/8” H.D. Tie Rod End - R.H.

#TL004920232 - $50.00 Each

• 7/8” H.D. Tie Rod End - L.H. (GM Taper & Thread size 7/8” x 18TPI)

#BAL713/714 - $8.00 Each

• 7/8” Jam Nut

#BAL225/226 - $15.95 Each

7/8” Tube Inserts

• Welded Steering Linkage IS NOT D.O.T. street legal.
• DOM Tube & good welding is very strong & great for off road.